Available Sizes:
- Bay Widths – 30’, 32’, and 35’
- Lengths – Any multiple of 12 ft.
Material Specifications:
- Columns – 4”sq x 13ga tube (50,000 psi yield/55,000psi tensile)
- Upper and lower truss members, roof purlins, and endwall verticals – 2”sq x 15ga tube (50,000psi yield/55,000psi tensile)
- Endwall and sidewall horizontals and truss web members – 1½”sq x 16ga tube (45,000psi yield/48,000psi tensile)
- Gutter – 10.4” wide x 1/8 thick aluminum (35,000psi yield, 38,000psi tensile) Brace Cables – ¼” 7 x 19 galvanized steel
Design Criteria:
- Column/truss spacing is 12’. All widths have five roof purlins.
- Standard gutter heights are 8’ to 14’ in 2’ increments.
- Lengths up to 48’ have one set of brace cables/column run, over 48’ two sets/column run.
- Standard ratings are 30lb/sqft roof load and 90mph wind load. Higher ratings are available with an increase in cost.
Cover Options and Sizes:
- Roof – Polyethylene film (30’ wide/36’ poly, 32’ wide/36’ poly, 35’ wide/40’ poly)
- Sidewalls and Endwalls – 8mm polycarbonate sheet, corrugated polycarbonate sheet, or polyethylene film
Request a Quote
The Jāderloon® Advantage
- 30% stronger frames
- More efficient temperature control
- Greater humidity control
- Designed to withstand the worst weather
- Lowest total cost of ownership
- Reduced maintenance
- Longer life
- Best warranty in the industry
- 24-Hour response time
Request a Quote
Top
